Puppy

From Danleff Wiki
Jump to: navigation, search

--Danleff 05:01, 11 November 2012 (PST)

Info

Audio

  • GA-A75-UD4H
  • lspci -vnn | grep -iA5 audio

00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01) Subsystem: Giga-byte Technology Device [1458:a132] Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fe020000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel --

  • 01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0bee] (rev a1)

Subsystem: Device [196e:089c] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fbffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

  • aplay -l
    • card 0: Generic [HD-Audio Generic], device 0: ALC889 Analog [ALC889 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
    • card 0: Generic [HD-Audio Generic], device 1: ALC889 Digital [ALC889 Digital]
 Subdevices: 1/1
 Subdevice #0: subdevice #0

SFS Files

  • Currently, installing the "devx" file in a Type 2 (full) hard drive installation is more complicated, and you can't undo it. It involves some steps....
  1. Click on the devx_xxx.sfs in a ROX-Filer window to mount it.
  2. Open a terminal in the mounted directory.
  3. # cp -a --remove-destination ./* /mnt/hda2/
  4. # sync
  5. Close the terminal.
  6. Click on the devx_xxx.sfs file to unmount it